Symons Cone Crusher
The symons cone crusher is the cone crusher which is the earliest appearance in the world, and it is used widest and larger quantity crush mechanism in present. With the improvement of the series of cs cone crusher, their structure is more perfect and the technology parameter is more advanced, so these crushers have excellent performance in the aspects of manufacture, installation, use and maintenance etc.
Symons Cone Crusher made plaster stone and engine oil separated, assured reliable performance. The type of crushing chamber depend upon the size of feed and fineness of the crushed product. The standard type is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head is applied to fine crushing.
Symons cone crusher technical parameter chart can be developed for use as an application tool to properly utilize the Symons cone crusher's capabilities. The cs cone crusher is one component of the production line. As such, its performance is in part dependent on the proper selection and operation of feeders, conveyors, screens, supporting structure, electric motors, drive component and surge bins.
Symons cone crusher has been developed to crush high or medium hardness material, such as iron ore , copper ore, limestone, quartz, granite, and sand stones, etc. And the cs cone crusher is used in metallurgical, construction, road building, chemical, silicate Industries.
The symons cone crusher has the advantage of reliable construction, high prod activity, easy adjustment and less cost in operation. The spring release system of crusher acts an overload protection system that allows tramp to pass through the crushing chamber without damage to the crusher, use dry oil, water, two kinds of sealed formation.
Features Of Symons Cone Crusher:
This cs cone crusher concentrates on the speciality of high-frequency, optimization of cavity-type, reasonable stroke and bases on the advanced technology introduced abroad, follows the conception of laminated crushing principle, more crushing and less grinding.
1. High-performance
2. Good products size composition
3. Good stability
4. Convenient Cleaning-up
5. High reliability
6. Easy maintenance and operation
7. Low production costs
8. Widespread use
9. Separate Lubrication
Working Principle Of Symons Cone Crusher:
Motor drives eccentric bushing to rotate via V-belts, pulley, shaft, pionion, gear. Mantle rotates with eccentric bushing, so mantle goes near and far from the concave, and crush stone into smaller size.
Technical Data Of Symons Cone Crusher:
Standard:
| Model | Dia. mm (inch) | Cavity | Feed Opeing | Outlet Setting (mm) | Shaft Speed (r/min) | Power (kw) | Capacity (t/h) | Weight (t) | Dimension (mm) | |
| Closing Side (mm) | Open Side (mm) | |||||||||
| CSB75 | 900 (3') | Fine | 83 | 102 | 9-22 | 580 | 75 | 45-91 | 15 | 2821×1880×2164 |
| Coarse | 159 | 175 | 13-38 | 59-163 | ||||||
| CSB110 | 1200 (4') | Fine | 127 | 131 | 9-31 | 485 | 110 | 63-188 | 20 | 2821×1974×2651 |
| Medium | 156 | 156 | 13-38 | 100-200 | ||||||
| Coarse | 178 | 191 | 19-51 | 141-308 | ||||||
| CSB160 | 1295 (4 1/4') | Fine | 109 | 137 | 13-31 | 485 | 160 | 109-181 | 27 | 2800×2342×2668 |
| Medium | 188 | 210 | 16-38 | 132-253 | ||||||
| Coarse | 216 | 241 | 19-51 | 172-349 | ||||||
| CSB220 | 1650 (5 1/2') | Fine | 188 | 209 | 16-38 | 485 | 220 | 181-327 | 55 | 3911×2870×3771 |
| Medium | 213 | 241 | 22-51 | 258-417 | ||||||
| Coarse | 241 | 268 | 25-64 | 299-635 | ||||||
| CSB315 | 2134 (7') | Fine | 253 | 278 | 19-38 | 435 | 315 | 381-726 | 110 | 4613×3251×4732 |
| Medium | 303 | 334 | 25-51 | 608-998 | ||||||
| Coarse | 334 | 369 | 31-64 | 789-1270 | ||||||
Short Head:
| Model | Dia. mm (inch) | Cavity | Feed Opeing | Outlet Setting (mm) | Shaft Speed (r/min) | Power (kw) | Capacity (t/hour) | Weight (t) | Dimension (mm) | |
| Closing Side (mm) | Open Side (mm) | |||||||||
| CSD75 | 914 (3') | Fine | 13 | 41 | 3-13 | 580 | 75 | 27-90 | 15 | 2821×1880×2410 |
| Coarse | 33 | 60 | 3-16 | 27-100 | ||||||
| CSD110 | 1218 (4') | Fine | 29 | 57 | 5-16 | 485 | 110 | 50-132 | 20 | 2560×1942×2928 |
| Medium | 44 | 73 | 10-16 | 90-145 | ||||||
| Coarse | 56 | 89 | 13-19 | 141-181 | ||||||
| CSD160 | 1295 (4 1/4') | Fine | 29 | 64 | 3-16 | 485 | 160 | 36-163 | 27 | 2800×2342×2668 |
| Medium | 54 | 89 | 6-16 | 82-163 | ||||||
| Coarse | 70 | 105 | 10-25 | 109-227 | ||||||
| CSD220 | 1676 (5 1/2') | Fine | 35 | 70 | 5-13 | 485 | 220 | 90-209 | 55 | 3917×2870×3771 |
| Medium | 54 | 89 | 6-19 | 136-281 | ||||||
| Coarse | 98 | 133 | 10-25 | 190-336 | ||||||
| CSD315 | 2134 (7') | Fine | 51 | 105 | 5-16 | 435 | 315 | 190-408 | 110 | 4130×3251×4454 |
| Medium | 95 | 133 | 10-19 | 354-508 | ||||||
| Coarse | 127 | 178 | 13-25 | 454-599 | ||||||
| Type | Cavity (coarse/fine) | Min. discharge size (mm) | Feed size (mm) | Capacity (t/h) | Power (kW) | Weight (t) | movable cone diameter (mm) |
| HPC-160 | C | 13 | 150 | 120-240 | 160 | 13 | 950 |
| F | 6 | 76 | 55-180 | ||||
| HPC-220 | C | 13 | 225 | 150-430 | 220 | 18 | 1160 |
| F | 6 | 86 | 90-260 | ||||
| HPC-315 | C | 13 | 290 | 190-610 | 315 | 26 | 1400 |
| F | 6 | 100 | 108-320 | ||||
| HPC-400 | C | 13 | 320 | 230-700 | 400 | 33 | 1500 |